| Customization: | Available |
|---|---|
| Material: | Composite Material |
| Usage: | for Air Conditioner, Industrial, for Environment Protection |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Phenolic composite air duct
|
||
|
Model
|
A. Single-color (aluminum foil) phenolic composite air duct (plate)
|
B. Double-color phenolic composite air duct (plate)
|
|
Product specifications
|
||
|
Width
|
1.2m
|
1.2m
|
|
length
|
3m(length can be customized and produced according to customer requirements)
|
3m(length can be customized and produced according to customer requirements)
|
|
thickness
|
2.0cm, 2.5m, 3.0cm
|
2.0cm, 2.5m, 3.0cm
|
|
Product Advantages
|
|
01. It has excellent thermal insulation properties, which can significantly reduce the heat loss of air conditioners
|
|
The thermal conductivity of phenolic composite air ducts is 0.02 to 0.032W/(m·k), while that of galvanized steel plate air ducts and fiberglass reinforced plastic air ducts is much higher. In addition, the unique connection method of phenolic composite air ducts ensures the excellent air tightness of the ventilation system, which is nearly eight times that of galvanized steel plate air ducts. Data shows that when transporting sample heat, the heat dissipation loss of galvanized steel plate air ducts is 15%, that of fiberglass reinforced plastic air ducts is 8%, and that of phenol foam insulation material air ducts is less than 2%.
|
|
|
|
02. Good noise reduction performance
|
|
The interlayer of the phenolic aluminum foil composite air duct wall is a porous phenolic foam material board that is
interconnected, which has excellent sound absorption performance. In a central air conditioning system, the noise generated by the operation of the air conditioning unit is within the range of 50 to 79dB, which is transmitted through the supply air ducts, forming indoor noise. Phenolic aluminum foil composite air ducts themselves are excellent tubular mufflers, and there is no need to set noise reduction capacity or noise reduction accessories such as noise reduction elbows. |
|
|
|
03. It is lightweight, which can reduce the load on buildings and is easy to install
|
|
Phenolic aluminum foil composite air ducts are lightweight, approximately 1.4 kg/m ³, while the bulk densities of galvanized steelplate air ducts (0.8mm thick) and fiberglass reinforced plastic air ducts (3mm thick) are 7.08 kg/m ³ and 15 to 20 kg/m ³ respectively. This can significantly reduce the load on buildings and is extremely beneficial for the installation of air ducts.When installing, only one bracket needs to be set up every 4 meters or so, and there will be sufficient supporting force. This greatly reduces the load-bearing capacity requirements for brackets, hangers, etc., making transportation and installation very convenient.
|
|
|
|
04. Lower the floor height
|
|
Traditional air ducts require on-site insulation layer construction, thus demanding a certain construction height. This places additional requirements on the building's floor height. Phenolic aluminum foil composite air ducts do not require on-site insulation construction, so there is no need to reserve construction space, and the floor height of the building can be reduced
|
|
|
|
05. Durable and long-lasting
|
|
Galvanized steel plates are more prone to rust in a humid environment, while fiberglass reinforced plastic is prone to aging and damage. Therefore, the service life of traditional air ducts is not long, approximately 5 to 10 years. The insulation layer wrapped around traditional air ducts, such as glass wool, has a service life of only 5 years, while the service life of phenolic aluminum foil composite air ducts is at least 20 years or more. Therefore, the service life of phenolic aluminum foil composite air ducts is more than three times that of traditional air ducts. In addition, the reuse rate of phenolic aluminum box composite air ducts can reach 60% to 80%, while traditional air ducts can hardly be reused.
|
|
|
|
06. It can shorten the construction period
|
|
Phenolic aluminum foil composite air ducts are very light in weight and easier and faster to install than traditional air ducts. When hoisting air ducts, the required hangers are simple, in small quantities, and almost no machinery is needed. The production is simple and straightforward, completely breaking through traditional craftsmanship. It shortens the construction period for adults and is also very convenient for on-site modifications.
|
|
|
|
07. Hygiene, avoiding a single contamination
|
|
The surface of the phenolic aluminum foil composite air duct is sealed with aluminum foil, which ensures the hygiene of the conveyed medium and avoids secondary pollution. Moreover, the inner layer has no water condensation and does not rust. In traditional air ducts, glass wool and asbestos are prone to moisture absorption. Once they absorb water, their insulation performance deteriorates severely. Moreover, asbestos is a carcinogen, and the dust from glass wool can irritate the skin, causing construction workers to feel itchy all over. In addition, galvanized steel plate air ducts are prone to rust and cold bridge phenomena are likely to occur.
|
|
|
|
08. Aesthetically pleasing and suitable for exposed decoration
|
|
Phenolic aluminum foil composite air ducts can be made in various colors, are aesthetically pleasing, and are particularly suitable for exposed installation. The surface of traditional air ducts needs to be wrapped with aluminum foil on site, so the exposed installation effect is not very good.
|
|
|
The main production and management: Molded Polystyrene Foam Board,Graphite Polystyrene Board(Neopor),Modified insulation board specialty,Polymer Crack-resistant Mortar,polymer adhesive mortar,Glass beads insulation mortar,dry-mixed ready-mixed masonry mortar, dry-mixed ready-mixed plastering mortar,Exterior Wall Cracking Putty,EPS molding and other exterior insulation materials, as well as various foam sculptures and indoor and outdoor display items.
Shanxi Xingfuli Weiye Science and Technology Co., Ltd. is a specialized and innovative enterprise integrating R&D, production and sales. Its registered capital of 10 million yuan, the legal representative of Zhang Qingchen, production base is located in Taiyuan City, Shanxi Province, Xiaodian District, Liu Jiabao Township, Wang Wu Village, the factory covers an area of 17,000 square meters, with an annual output of 60,000 cubic meters of thermal insulation materials.
Q1 : What is your lead time?
A1 : It usually needs about 15- 20 days after receiving the PO.
Q2 : Do you provide free samples?
A2 : Yes, free samples are available, generally speaking, the buyer shall bear all the delivery cost.
Q3: Is your product size fixed?
A3:No, product's width is fixed which is 1200mm or 600mm, product's length is not fixed, it is customized.
Q4: How can I be sure to have a reliable quality from Myreal?
A4: In China,this industry holds a great number of factories with greatly differing quality level.
Myreal has its wholesale business in Chinese local market, and has to work with reliable factories to serve local builders. Any major quality problem may put us at the risk of reputation loss & lawsuit.
Q5.When can I get a price?
We usually quote within 24 hours after we get your inquiry.
){kind=link}